Frequently Asked Question Details :
Back

Title: Connect with Auto Connect

Description: Details on how to connect your scanner with the auto connect feature within ESP

Issue: How to connect your scanner with the auto connect feature in ESP

Solution: Note: If you are setting up a defaulted or new scanner for the first time, the communications values of the scanner should match those of the program. For the MS-880, you will be presented with the options HOST PORT (25-pin port) and Config Port (15-pin port).
 1. Click on the Start button in the Auto Connect dialog
 2. Allow time for the auto connect routine to test all of the combinations for the auto connect routine to test all of the combinations. You will see a blue progress bar fill across the Auto Connect dialog.
 3. When connected, the Connected message will appear in a green box in the status bar on the bottom right of the dialog.
 4. If connection fails, enable a different Com port and try again.
 Note: If you do not see either CONNECTED or DISCONNECTED message at the bottom of your dialog, try expanding the ESP window horizontally.

Other Keywords: connecting scanner with ESP, connecting with auto connect, auto connect and ESP, auto connecting with ESP, connect, auto connect

Print this FAQ


Back